< back Pedestals & Chairs

Categories

Viewed products

  • 10895

    One handle manual chair pedestal...

10895

One handle manual chair pedestal

––––––––––––––––––––––––––––
10895/32
Without plate or slide
Reference: 08.40.13320
––––––––––––––––––––––––––––––––––––––––
10895/A
With universal plate (A) 00100
Reference: 08.40.13001
––––––––––––––––––––––––––––––––––––––––
10895/B
With plate (B) 00101 suitable for our chairs
Reference: 08.40.13002
––––––––––––––––––––––––––––––––––––––––
10895/C
With universal slide (C) 10900
Reference: 08.40.13003
––––––––––––––––––––––––––––––––––––––––
10895/D
With slide (D) 10901 suitable for our chairs
Reference: 08.40.13004

More details

Request information >

Pipes and top plate or slide in anodized light alloy, base in sanded and shined light alloy

  • Suitable for not particulary fast boats.
  • A single handle allows to rotate the chair and to modify the height - stroke 200 mm.
  • The careful finish makes it appropriate for all environments.
  • The plastic bushes inside the pedestal avoid the risk to scratch the surface of the piston.
  • The chair can be rotated at rest over 360°.
  • When sailing, for safety reasons, the set-up handle must be locked.
  • The slider 10900 (C) can be adjusted, when not occupied, on 190 mm of stroke.
  • The slider 10901 (D) fits our chairs and can be adjusted, when not occupied, on 135 mm of stroke.

Plates and sliders

Click on the link for more info


(B) 00101 (C) 10900 (D) 10901

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Instructions


Sketch (A)

To rotate the chair:
a) Unscrew of 1/4 turn the handle (1).
b) Turn the chair (2).
c) Lock the handle (3).

Sketch (B)

To lift the chair:
a) Unscrew a few turns of the handle (1).
b) Lift the chair to the requested height (4).
c) Push toward the pedestal the handle (2) and lower it (3) untill it is in contact with the lower tube.
d) Screw in the handle untill is locked (5).
e) If the handle is not in a vertical position, push the button and turn it to the neede position.

To lower the chair:
a) Unscrew a few turns of the handle (1).
b) Push toward the pedestal the handle (2) and lift it (3) along the tube.
c) Lower the chair (4).
d) Push toward the pedestal the handle (2) and lower it (3) untill it is in contact with the lower tube.
e) Screw in the handle untill is locked (5).
f) If the handle is not in a vertical position, push the button and turn it to the neede position.