< back Electric Struts

Categories

Viewed products

Thrust 100 Kg

Fast electric struts for translation

1000 N – Speed 36 mm/sec – Push-pull

Available with strokes from 100 to 2900 mm

More details

Request information >

Cylinder, piston and brackets in anodized light alloy.

  • Struts with a high translation speed (36 mm/sec), therefore suitables for long strokes, but not to lift loads.
  • The struts are equipped with an adjustable magnetic end of stroke.
  • Available as a pair.
  • Supplied with an electronic control box for each strut to control, protect against the overloads and 1.30 m power cable.
  • On request version with adjustable magnetic end of stroke.
  • It's necessary to add a 3 positions switch with automatic return to the OFF state.
  • An acoustic/flashing movement warning is available on request.
  • Available for 12 or 24VDC power.

HIGH SPEED VERSIONS: Ideal for handling structures with long stroke due to their high travel speed, not suitable for lifting.
It is essential that long struts are properly incurred if positioned horizontally to prevent flex. Equipped with magnetic limit.

ENCODER: Struts for installation in pairs, equipped with encoded electronics and control unit to obtain a perfect synchronization, even when subject to different loads. It is possible, where permitted by law, to store up to four different and independent end positions, pre-set by the user at the time of installation, selectable with just a short press of a single button. Can also be used individually when such a precise movement is required, defining a different points of start and end of stroke. Come with backlit push button control and programming. Optional extension cable of 2 - 5 or 8 m.

Available with strokes from 100 to 2900 mm.

Item Mounting Push Synchro Stroke Volt Weight
Code
709701/F/12 push-pull end of stroke 970 mm 12 5 Kg 09.64.09701
709701/F/24 push-pull end of stroke 970 mm 24 5 Kg 09.64.09702
714701/F/12 push-pull end of stroke 1470 mm 12 09.64.14701
714701/F/24 push-pull end of stroke 1470 mm 24 09.64.14702
719701/F/12 push-pull end of stroke 1970 mm 12 09.64.19701
719701/F/24 push-pull end of stroke 1970 mm 24 09.64.19702
ES709701/12 push-pull encoder 970 mm 12 09.68.09701
ES709701/24 push-pull encoder 970 mm 24 09.68.09702
ES709701/2/12  pair push-pull encoder 970 mm 12 12 Kg 09.70.09701
ES709701/2/24 pair push-pull encoder 970 mm 24 12 Kg 09.70.09702
ES714701/12­ push-pull encoder 1470 mm 12 09.68.14701
ES714701/24 push-pull encoder 1470 mm 24 09.68.14702
ES714701/2/12 pair push-pull encoder 1470 mm 12 09.70.14701
ES714701/2/24 pair push-pull encoder 1470 mm 24 09.70.14702
ES719701/12 push-pull encoder 1970 mm 24 09.68.19701
ES719701/24 push-pull encoder 1970 mm 12 09.68.19702
ES719701/2/12 pair push-pull encoder 1970 mm 12 09.70.19701
ES719701/2/24 pair push-pull encoder 1970 mm 24 09.70.19702